Markers; Placing A Marker; Clearing A Locator In Safe Mode; Storing A Locator In Safe Mode - Roland VS-2400CD Owner's Manual

13—Operating the Hard Disk Recorder

Storing a Locator in Safe Mode

1. Position the now line at the desired location on the
2. Press LOCATOR—the LOCATOR window appears.
3. Turn the Time/Value dial to scroll through the list until
4. Enter the slot's two-digit number on the numeric
5. Press ENTER/YES to store the now line's current position as a new locator and

Clearing a Locator in Safe Mode

1. Press LOCATOR—the LOCATOR window appears.
2. Turn the Time/Value dial to scroll through the list until
3. Enter the locator's two-digit number on the numeric
4. Press CLEAR—"Clear Locator?" appears.
5. Press ENTER/YES to clear the selected locator and close the window, or just press

Markers

You can bookmark up to 1,000 locations in a project using markers. Markers are a great
way to keep track of key moments in a project. You can use them to tag edit points
you've located using the Preview (Page 177) or Scrub (Page 178) features. You can also
use them to re-order the sections of a project using the Region Arrange feature.
Markers can be named and manually edited.
You can see the last marker the now line passed in the current time location display. If
there are no markers in the project, the marker area of the display (Page 122) shows
"—." If the now line hasn't yet reached the first of the project's makers, you see "***."
We recommend using markers to tag the locations of individual project events, and
using locators (Page 179) to memorize where your project's sections are since you can
recall locators more quickly than markers. And with 1,000 markers, you won't use them
all up as quickly as the 100 locators in a project.
When you create an audio CD on the VS-2400CD (Chapter 26), you'll place special CD
track markers to identify the selections on the CD.

Placing a Marker

You can place a marker when the project is stopped or when it's playing.
There must be at least 0.1 seconds of time between any two markers.
182
project.
the desired unused locator slot is visible.
keypad—an arrow appears to the left of the slot in the
list and "Regist Locator?" appears in the window.
close the window, or just press EXIT/NO twice to leave the window without
registering the locator.
the desired locator is visible.
keypad—an arrow appears to the left of the locator in
the list.
EXIT/NO three times to leave the window without clearing the locator.
www.RolandUS.com Roland VS-2400CD Owner's Manual