Fx Return Channel Parameter Strip; Input And Track Channel Ch View Elements; Track/V-Track Info - Roland VS-2400CD Owner's Manual

32—VGA Main Display CH VIEW Screens
8. FDRLINK Button
Click FDRLINK—so it's lit—to link the current channel's fader to its
odd/even partner so their levels can be set by moving either fader
while their other parameters remain independently controllable.
9. AUTOMIX STATUS Button
Click the AUTOMIX STATUS button repeatedly to set the channel's
status as desired when Automix mode is on.

FX Return Channel Parameter Strip

1. Channel Name
2. ASSIGN Selector
As shipped from the factory, each Aux bus is routed to
the input of its same-numbered effect processor. To
route a different Aux bus or a Direct path to the FX
return channel's processor, click ASSIGN and select
the desired bus from the pop-up menu.
You can also do this by dragging the routing nodes in the LOOP
FX ASSIGN area of the screen, described on Page 420.
3. GROUP Selector
To assign the channel to a fader group, click GROUP
and select the desired group from the pop-up menu.
4. MONO Switch
By default, the output of an effect processor is stereo. To collapse its left
and right sides to a mono signal, click MONO so it lights.
5. AUTOMIX STATUS Button
Click the AUTOMIX STATUS button repeatedly to set the channel's
status as desired when Automix mode is on.

Input and Track Channel CH VIEW Elements

Track/V-Track Info

416
Track and V-Track info for a standard input or track channel
Track and V-Track info for linked input or track channel
www.RolandUS.com
224
224
The symbols in
the V-Track area
are described on
Page 403.
Roland VS-2400CD Owner's Manual
151
318
1.
2.
3.
4.
5.
224
318