Display; Playrec - Roland VS-2400CD Owner's Manual

27—UTILITY Menu Parameters
Turn off DITHER until it's needed since it affects all audio transmitted from the
VS-2400CD's digital outputs, including the audio sent to your connected Roland
DS-90A or DS-50A Digital Reference Monitors.
DIGITAL COPY PROTECT
The VS-2400CD allows you to use SCMS ("Serial Copy Management system") to
prevent additional copies from being made of digital audio you've recorded from the
VS-2400CD's coaxial or optical digital outputs onto a DAT tape or MiniDisc. To prevent
copying, turn the DIGITAL COPY PROTECT parameter on before sending the digital
audio to the DAT or MiniDisc recorder.
DIGITAL IN SELECT
See "Turning On the Coaxial or Optical Digital Inputs" on Page 127 for an explanation
of this parameter, which also appears on the EZ ROUTING PATCH BAY screen.

DISPLAY

DISPLAY OFFSET TIME
This parameter is explained in "Shifting the Project Start Time" on Page 303.
TIME DISPLAY FORMAT
This parameter is explained in "Shifting the Project Start Time" on Page 303.
PEAK HOLD Sw
You can set the VS-2400CD's level meters so that their peak lines "stick" at their highest
positions, remaining there until you press HOME•DISPLAY to release them. This
allows you to look away from the display without worrying that you'll miss problematic
level peaks. To make the peak lines stick, set PEAK HOLD Sw to On. To return them to
their normal behavior, turn the parameter off.

PLAYREC

RECORD MONITOR
RECORD MONITOR is explained in "Monitoring During Punching" on Page 185.
360 www.RolandUS.com Roland VS-2400CD Owner's Manual
UTILITY menu
F4 (PlyRec)