Roland VS-2400CD Owner's Manual page 307

V-LINK function chart
When V-LINK mode is on (V-LINK lit), the VS-2400CD can control the following functions
on your video device.
Select a clip bank
Select a clip
Color difference signal
(Cr) level adjustment
Color difference signal
(Cb) level adjustment
Dissolve time
Image brightness
adjustment
Playback speed setting Adjusts the video playback
*1
*2
*2
If you hold down CLEAR and press V-LINK, the parameters of the connected video
device will be initialized. For details on the initial value of each parameter, refer to the
owner's manual for your video device.
For details on the MIDI messages transmitted in V-LINK mode, refer to "MIDI
Implementation" (Appendices, Page 142).
Roland VS-2400CD Owner's Manual
Function
Selects one of the 128 clip
banks.
* The number of available clip banks
will depend on the connected video
device.
Selects one of the 128 clips
within a bank.
* The number of available clips will
depend on the connected video de-
vice.
Adjusts the red hues.
Adjusts the blue hues.
Specifies the time over which
dissolve (overlap) will occur
when switching between clips.
Adjusts the brightness of the
image.
speed.
For details on the procedure for automix micro editing, refer to "Micro-Editing Automix Data" on Page 328.
For the procedure of playing an automix, refer to "Playing Back Automix Data" on Page 322.
Operations of faders 1–5 can be recorded in the automix. When you play back the recorded automix, the sound
and the image adjustments will occur in synchronization. For details on automix procedure, refer to
"25—Automix" on Page 315.
By holding down CLEAR and pressing CH EDIT for the corresponding fader, you can initialize that parameter
to the center value.
Explanation
www.RolandUS.com
23—MIDI and Synchronization
VS-2400CD operation
Use the automix Micro Edit
function to create events.
When you play back the
recorded automix, the clip
bank will be switched.
Use the automix Micro Edit
function to create events.
When you play back the
recorded automix, the clip will
be switched.
Turn V.FADER on (lit), and
operate fader 1.
Turn V.FADER on (lit), and
operate fader 2.
Turn V.FADER on (lit), and
operate fader 3.
Turn V.FADER on (lit), and
operate fader 4.
Turn V.FADER on (lit), and
operate fader 5.
The range of change will
depend on the speed range
setting of your video device.
*1
*1
*2
*2
*2
*2
*2
307