Aux Busses - Roland VS-2400CD Owner's Manual

•
•
•
•
Pre- and post-fader AUXDIR metering shows Aux and direct bus signals before or after
the Aux bus and Direct path master level controls—see Page 201 and Page 203.
The FX Return Channel Meters
You can meter the levels of the four stereo FX return channels by pressing PAGE until
"FX RTN" appears above F5. Press F5 (FX RTN) to display the FX return channel
meters.
Roland VS-2400CD Owner's Manual
F3 (TR Mix)—to show the playback levels of the tracks and the MONITOR and
MASTER bus levels.
1.
F4 (AUXDIR)—to show the master levels of the eight Aux send busses, eight Direct
paths and the MONITOR and MASTER bus levels.
1. 2.
F5 (OUTPUT)—to show the levels of signals at the VS-2400CD analog and digital
output jacks and connectors.
1. 2. 3.
F6 (To Pre/To Pst)—This switch allows you to select pre or post metering (Page 117)
when viewing the IN Mix, TR Mix and AUXDIR meter views. (The switch is grayed-
out when you've selected the INPUT or OUTPUT meter views.) When the pre/post
indicator (Page 116) shows "Pre," you can press F6 (To Pst) to set the metering to
post-fader. When the indicator shows "Pst," you can press F6 (To Pre) to switch to
pre-fader metering.
1.
1. Track Channels 1-24
2. Stereo MONITOR bus
3. Stereo MASTER bus
2. 3.

1. Aux Busses 1-8

2. Direct Paths 1-8
3. Stereo MONITOR bus
4. Stereo MASTER bus
3. 4.
1. Stereo Aux Output A
2. Stereo Aux Output B
3. R-BUS Digital Outputs 1-8
4. Stereo Coaxial or Optical
4. 5. 6.
5. Stereo MONITOR bus
6. Stereo MASTER bus
1. FX Return Channels 1-4
2. Stereo MONITOR bus
3. Stereo MASTER bus
2. 3.
www.RolandUS.com
8—The Home Screen
Digital Outputs
121