Vga Control Bar - Roland VS-2000 Owner's Manual Addendum

VGA Control Bar

The VGA main display's control bar provides a wide assortment of important tools.
12.
1. Write-Protect Indicator
When the current project is write-protected, the Write-Protect indicator
lights.
2. Current Time Location Display
The Current Time Location display shows the current position of the
timeline in time code—hours/minutes/seconds/frames/subframes—
and in measures, beats and ticks. It also shows the most recent marker
and the marker's name or—if it hasn't been named—its time location.
You can navigate a project using the Current Time Location display, as described on
Owner's Manual Page 131.
3. Mastering Controls
Click MASTERING ROOM to turn the Mastering Room on or off. When
it's on, click Master Tracks Record to start recording mastering tracks.
Roland VS-2000 Owner's Manual, Version Two Addendum
2.
1.
13. 14. 15.
1. Write-protect indicator
2. Current Time Location display
3. Mastering Controls
4. TUNER (TUN)
5. USB storage
6. Automix controls
7. UNDO/REDO
8. EXT SYNC
9. Metronome
10. A.PUNCH
11. LOOP
12. ABS/REL Indicator
Time code location
MASTERING ROOM
4—VGA Main Display Universal Elements
3. 4. 5.
8. 9. 10. 11.
16. 17. 18.
13. SCRUB
14. PREVIEW buttons
15. Position bar
16. Transport buttons
17. PREVIOUS/NEXT
18. MARKER
19. TAP
20. LOCATOR (LOC)
21. SCENE (SCN)
22. Scene name/number
23. Project information
Measures, beats and tick location
Most recent marker Marker name/location
Master Tracks Record
www.RolandUS.com
6. 7.
20. 22.
19. 21.
104
130
359
23.
35