Exchanging Digital Audio Data During Synchronization - Roland VS-2400CD Owner's Manual

23—MIDI and Synchronization

Exchanging Digital Audio Data During Synchronization

You can exchange digital audio between the VS-2400CD and its sync partner. You might,
for example, want to move audio tracks from one V-Studio to another. To learn about
digital connectors, see Page 50. To learn about clocking digital audio, see Page 128.
When the VS-2400CD is the Master
You can set its MASTER CLOCK parameter (Page 128) to INT to send digital audio to
the slave device with the VS-2400CD controlling the audio's timing.
When the VS-2400CD is the Slave
You can receive digital audio from the master device by setting the VS-2400CD's
MASTER CLOCK to DIGITAL IN. The received digital audio's clocking is computed
from, and controlled by, the master device's time code.
You can also send digital audio from the VS-2400CD to the master device by setting the
VS-2400CD's MASTER CLOCK parameter to INT—with this setting, the VS-2400CD
generates its own master clock based on the time code received from the master device.
308 www.RolandUS.com Roland VS-2400CD Owner's Manual