The Vga Playlist Control Panel - Roland VS-2400CD Owner's Manual

The VGA Playlist Control Panel

Click the Playlist Control button located at the
upper right just above the playlist to open the
playlist control panel. To close the playlist control
panel, click the Playlist Control button again.
You can also show or hide the playlist control panel by holding down SHIFT on the
VS-2400CD and pressing its HOME•DISPLAY button.
The V.Track control panel pane allows you to activate any V-Track by clicking on it.
Click the control panel's LOC/SCN tab to display the LOC/SCN (Locator/Scene) pane.
In the LOC/SCN pane, you can quickly store, recall and clear locators and scenes right
from the playlist.
Use the upper half of the pane for locator operations. To:
•
•
•
•
Roland VS-2400CD Owner's Manual
Select locator banks
with these buttons.
Perform locator
actions by clicking
these buttons
Select scene banks
with these buttons.
Perform scene
actions by clicking
these buttons
change locator banks—click the desired bank's number.
store a locator—move the now line to the desired location and click the number of an
unused locator position.
recall a locator—click the locator's number.
clear a locator—hold down CLEAR on the VS-2400CD and click the locator's
number.
31—VGA Main Display Home Screen
Each track's 16 V-Tracks are arranged
in a horizontal row. A symbol shows
each V-Track's status.
Selected, contains audio
Selected, no audio
Not selected, no audio
Not selected, has audio
Any V-Track that's selected for
editing flashes. Destination V-Tracks
also flash, outlined in gray. See
Page 240 for details.
www.RolandUS.com 409