27-Utility Menu Parameters; The Main Utility Menu Screen - Roland VS-2400CD Owner's Manual

27—Utility Menu Parameters
The UTILITY MENU contains a wide array of parameters. Some of its screens present
parameters that set the general behavior of the VS-2400CD—or its behavior when a
particular project is loaded—while others offer detailed control of specific VS-2400CD
features. This chapter describes what you'll find in the UTILITY menu.
We've already explained many of the UTILITY menu's screens and parameters in
earlier chapters—as we go through the UTILITY menu screens, we'll refer you to
relevant descriptions elsewhere in the VS-2400CD Owner's Manual. They're noted here
for completeness.

The Main UTILITY Menu Screen

To view the UTILITY menu:
1. Hold down SHIFT and press F4•UTILITY.
You can display any of the UTILITY menu's screens by cursoring to it in the UTILITY
menu and pressing ENTER/YES, or by pressing its F button shown on one of tabbed
layers as the bottom of the screen.
The SYSTEM, GLOBAL, PLAY/REC and V.FDR buttons each lead to sets of related
screenfuls of parameters—these sub-screens are called "Param1", "Param2" and, in the
case of the V.FDR screenset, "Param3." To navigate between these screens, press F1
(Param1), F2 (Param2) or F3(Param3) as desired.
Many of the other UTILITY menu items also have sub-screens of their own, as
explained in their descriptions.
On some UTILITY menu screens, parameters are arranged in labeled groups. In the
following descriptions, we'll organize parameters according to these groupings.
Roland VS-2400CD Owner's Manual
If you're looking for an screen
whose F button is currently
hidden, press PAGE repeatedly
until its F button appears.
www.RolandUS.com 353