Roland VS-2400CD Owner's Manual page 305

Switching V-LINK mode off
1. Press the VS-2400CD's V-LINK button.
Connection with DV-7PR
By using the VS-2400CD in conjunction with the Edirol DV-7PR's "Presenter," you can
do the following things.
•
•
•
The V-LINK function is compatible with DV-7PR's "Presenter" version 1.5 or later.
1. Make sure that the power of all devices is turned off, and make connections as
Before connecting this unit to other devices, turn off the power to all units. This will
help prevent malfunctions and/or damage to speakers or other devises.
2. Turn on the power of each device.
3. Start up the Edirol DV-7PR "Presenter."
4. Hold down SHIFT and press F4•UTILITY.
5. If "STNC" isn't visible above F6, press PAGE until it is.
6. Press F6•SYNC—the SYNC PARAMETER screen appears.
Roland VS-2400CD Owner's Manual
V-LINK will go dark, and V-LINK mode will be turned off.
Settings necessary for operation of the Edirol DV-7PR can be made from the
VS-2400CD.
You can use the faders of the VS-2400CD to control video playback.
You can use the VS-2400CD's automix for sync roll of video from the Edirol DV-7PR
and sound.
shown below.
Edirol DV-7PR
REMOTE
Edirol UM-1
MIDI OUT
VS-2400CD
23—MIDI and Synchronization
Projector
Display
www.RolandUS.com 305