Name; Protect; Entering A Project Comment; Re-Naming A Project - Roland VS-2400CD Owner's Manual

8. Press F5 (OK). The VS-2400CD displays:
9. To proceed, press ENTER/YES, or press EXIT/NO to cancel the operation.
10. Press ENTER/YES to save any changes you've made to the currently loaded project,

NAME

You can re-name the currently loaded project. On the PROJECT NAME screen, you can
also enter a comment about the project and view assorted project information.

Re-Naming a Project

1. Hold down SHIFT and press F1 (PROJECT).
2. If "NAME" isn't visible above F3, press PAGE until it is.
3. Press F3 (NAME)—the PROJECT NAME screen appears.
4. Enter the desired name as described in "Naming" on Page 71.

Entering a Project Comment

1. On the PROJECT NAME screen, select the Comment box and enter the desired

PROTECT

You can lock a project on your hard drive to protect its data from being
accidentally overwritten, and to prevent accidental erasure of the
project. This is called "write-protecting" a project. You can also unlock a
project using the same procedure.
Roland VS-2400CD Owner's Manual
The VS-2400CD asks if you want to store the current project before creating and
loading the new one.
or press EXIT/NO to create and load the new project without saving the old one.
comment the same way you'd enter a name.
7—Project and Drive Operations
www.RolandUS.com
PROJECT menu
F3 (NAME)
PROJECT menu
F4 (PROTEC)
95