Clearing Markers; Editing Markers - Roland VS-2400CD Owner's Manual

13—Operating the Hard Disk Recorder

Clearing Markers

In addition to the two methods listed here, you can clear a marker in the UTILITY
menu's Marker screen, described in "Editing Markers" below.
Clearing a Marker Using PREVIOUS and NEXT
1. Move to the marker you want to clear using PREVIOUS or NEXT (see above).
2. Hold down CLEAR and press TAP.
Clearing a Marker in the Clear Marker Window
1. Hold down SHIFT and press F6•MARKER—the Locate to
2. Turn the Time/Value dial to place an arrow to the left of the
3. Press CLEAR—the Clear Marker window appears.
4. Turn the Time/Value dial to select another marker if you
5. Press ENTER/YES to clear the selected marker.
6. Press EXIT/NO to leave the Clear Marker window.
7. Press EXIT/NO to close the Locate to Marker window.
Clearing All Markers at Once
When you clear all markers, every marker in the project is deleted, including all CD
track markers.
1. Hold down SHIFT and CLEAR and press TAP. The VS-2400CD asks if you're sure
2. Press ENTER/YES to clear all of the project's markers, or EXIT/NO to cancel the

Editing Markers

The UTILITY menu's Marker screen provides tools for naming, clearing, resetting or
jumping to any marker.
1. Hold down SHIFT and press F4•UTILITY.
2. Press PAGE until "MARKER" appears above F4.
3. Press F4 (MARKER).
4. Press
5. Press F6 (EXIT) when you're done to confirm your changes.
184
Marker window appears.
desired marker.
want to.
you want to delete all of the project's markers.
operation.
or or turn the Time/Value dial to select a marker to edit. You can:
• Press F1 (NAME) to rename (Page 71) the selected marker.
• Press F2 (CLEAR) to delete the selected marker.
• Press F3 (GetNow) to reset the marker to the now line's current position.
• Press F4 (GO TO) to move the now line to the selected marker's position.
www.RolandUS.com Roland VS-2400CD Owner's Manual