Cd Capture - Roland VS-2400CD Owner's Manual

26—Mastering and CD-R/RW Operations
Repeatedly press F4 (INFO) to display any of three types of information about the
displayed phrases: their names, dates of creation, and sizes.
3. Select a phrase for export by cursoring to it using
You can repeatedly press F2 (ALL) to select or unselect all of the currently available
phrases at once.
4. When you've selected all of the phrases you want to export as .WAV files, press F5
Burning Exported .WAV Files to CD
1. When you've pressed F5 (NEXT) on a TRACK EXPORT or PHRASE EXPORT
You can see the title of the screen and the currently selected hard drive above the area
shown in this illustration.
2. A list of the selected tracks or phrases is displayed at the left of the screen—you can
3. Set Verify as desired. You can set it to:
4. Select the desired drive speed. We recommend trying the MAX setting that uses
5. When you've returned to the screen shown above, press F5 (OK) to export your

CD Capture

The VS-2400CD can capture audio directly from an audio CD into a
project that has a sample rate of 44.1kHz, the same sample rate as
audio CDs. You can capture an entire audio selection from a CD or a
portion of a selection.
350
(MARK) to checkmark it.
(NEXT) to view the WAV Export CD burning screen, described below.
screen, the WAV Export CD burning screen appears. This screen is identical for
exporting tracks and phrases, except for its displayed title.
Selected
audio
Current
drive info
scroll up or down through this list to see what you're exporting by pressing F1
↑ ↓
(Scrol ) or F2 (Scrol ).
• Off—to finish the CD-burning process faster.
• On—to make sure the CD has no data errors.
your burner's fastest speed. If you have any trouble burning the CD, try again with
a lower speed.
tracks or phrases as .WAV files to the CD. The process may take a little while,
depending on the amount of audio data you're exporting.
www.RolandUS.com
and and pressing F3
CD burner
info
Roland VS-2400CD Owner's Manual
F1 (CDCapt)