Table of Contents
Advertisement
Flanger: An effect that reminds you of a jet taking
off and landing (ideal for guitar sounds).
Short Delay: A delay with a short delay time
Short Dly (FB): A short delay with many repeti-
tions
© The type you select here is applied to all Tones (includ-
ing the Arranger and the Composer).
Expansion Tone
See "Selecting Expansion Tones" on page 19.
Lyric: switching off the display of
lyrics
When using the KR-75 to play music data contain-
ing Lyrics, the lyrics are shown on the display. You
can switch off this display of the lyrics.
. On the Utility Menu screen, press <<<4PAGE> or
<PAGE> b> to select the following display page:
. Use the buttons to the left and right of the display to select
On or Off.
Now press any button on the front panel to hide the
lyrics that are already being displayed. Press
[PLAY] if you want to pursue your Karaoke perfor-
mance,
Pitch Bend Range
This sets the maximum amount of change (range)
that control how much the pitch changes when you
press the Soft pedal. This only works when you
assign the "Bend Up" or "Bend Down" function to
the left pedal (see page 47).
. On the Utility Menu screen, press <<<PAGE> or
<PAGE® b> to select the following display page:
. Use the buttons to the left and right of the display to set the
value.
The value can be set to any number from 0 to 12 (in
semitone steps, for a maximum of one octave).
Program Change (and Bank Select)
"Program changes" are MIDI messages that tell the
receiving instrument to select another sound (or
=~
Tone) and also contain information about which
Tone to select. There may be situations where you
would like to double the Upper part melody with a
sound of an external instrument that is not auto-
matically selected.
Enter the Program Change function. It allows you
to transmit sound select messages without choosing
Tones on the KR-75 itself.
(*) Let's agree to use the term sound select message to
describe MIDI message clusters consisting of one or
two bank select messages and a program change
message.
. On the Utility Menu screen, press <<<PAGE> or
<PAGEP P > to select the following display page:
—
. Use the <<> and <»> buttons at the lower left of the dis-
play to select the message type.
. Use <A> and <¥> to the left and right of the display to set
the value.
Value
0~127
0~127
1~128
Display
CC 00
MIDI message
Bank Select MSB
Bank Select LSB
CC 20
PC
Program Change
Please note that each press of a <A> or <W> button
will cause the KR-75 to transmit the value you set.
Always set the numbers in the same order as they
appear on the display: start with CC00, then set
CC20, and finally set a PC value.
© Most instruments do not understand CC20 messages,
so feel free to skip that one.
* Sound select messages transmitted on the Program
Change page are not executed by the KR-75.
MIDI: TX MIDI Ch./Local Control
. On the Utility Menu screen, press <<<4PAGE> or
<PAGE> >> to select the following display page:
MIDI
Tx
MIDI
Ch.
Local
Control
ak
TX
MIDI Channel
TX MIDI Ch refers to the MIDI channel used for
transmitting messages from the KR-75 to external
instruments (TX is short for transmit). If the exter-
nal instrument is set to receive on (RX) MIDI chan-
nel 3, select "3" here. Otherwise, the external instru-
ment will neither play nor select sounds, etc.
49
HSITONS
¥
a
Advertisement
Table of Contents
