Mode Setting - Panasonic SL-VGU1-EC User Manual

Starting

Mode setting

Mode setting Operation
In the CONFIG mode, turn on
the power.
Press ENTER key.
Press k ey or
Press ENTER key.
Press k ey.
Press ENTER key.
Press k ey or
Press ENTER key.
Press k ey.
Press ENTER key.
Press k ey or
Press ENTER key.
Press k ey.
Press ENTER key.
Press k ey or
Press ENTER key.
Press k ey.
Press ENTER key.
Press key or
Press ENTER key.
39
Description / Function
Displays the current transmission mode.
Blinks the displayed current transmission mode.
Selects the transmission mode from the three types (A
k e y. mode, B mode and C mode), and then displays the
selected mode.
Determines the transmission mode.
Displays the code of the decimal / hexadecimal number
setting.
Blinks the displayed code of the decimal / hexadecimal
number setting.
k e y. Selects either the decimal or hexadecimal number display.
Determines the display.
(If the hexadecimal number display is selected, the
code 'd 16' will appear.)
Displays the preset value.
Blinks the displayed preset value.
k e y.
Selects a value to be preset.
Determines the preset value.
(If the preset value is '0,' nothing will be changed.)
Displays the number of I/O control points.
Blinks the displayed number of I/O control points.
Selects the number of I/O control points in the range of
k e y.
32 to 512 points. Selection is possible in increments /
decrements of 32 points.
Determines the number of I/O control points.
Displays the I/O setting value of '0' (addresses 0 to 127).
Blinks the displayed I/O setting value of '0'.
Selects I/O setting 0, and displays the set data.
Input
Output
k e y.
Addresses 96 to 127
Addresses 64 to 95
Addresses 32 to 63
Addresses 0 to 31
I/O setting 0
Determines the set data of I/O setting 0.
Indication
Example
If A mode is
selected:
If B mode is
selected:
If C mode is
selected:
Example
Example
Decimal number
display
Hexadecimal
number display
Example
Example
If the preset value
is '0':
If the preset value
is '8':
Example
Example
If 512 points is
selected:
If 32 points is
selected:
Example
Example
If addresses 0 to
127 are set as
inputs:
If addresses 0
to 31 are set as
inputs, addresses
32 to 63 are set
as outputs, and
addresses 64 to
127 are set as
inputs:
Example