Chapter 5 Functional Description - Panasonic SL-VGU1-EC User Manual

12. EtherCAT indicator
11. Station address setting switches
10. EtherCAT connector (IN side)
9. EtherCAT connector (OUT side)
No. Designation
Hexadecimal indicator
1
(Orange)
2 Address display (Red)

Chapter 5 Functional Description

● It indicates the display mode of the address display.
• Lights up: Hexadecimal display mode
• Turns off: Decimal display mode
● The display contents differ in 'RUN mode,' 'CHECK mode' and 'CONFIG mode.'
The mode can be changed with the mode selection switch.
<RUN mode>
• LEDs light up in each transmission mode (3 types,) and trace out a rectangle in the clockwise direction.
A mode
• When an error occurs, the type of error is shown.
Note When the cause of the error is removed, the error display can be erased by pressing ENTER key
and SELECT keys (2 types) simultaneously.
<CHECK mode>
• At first, the recognized connected node number is displayed. Subsequently, the addresses are displayed
at every press of SELECT keys.
Connected node No.: I/O unit node No. is displayed in decimal / hexadecimal.
Address : I/O unit addresses are displayed successively in decimal / hexadecimal.
Note: In case of hexadecimal display, the hexadecimal indicator lights up.
• When an error occurs, the node number having the error and the error addresses are displayed succes-
sively.
<CONFIG mode>
• Each setting is displayed successively. The settings can be changed by using SELECT key.
• The display contents differ when power is switched on and when a change is made from RUN mode.
1. Hexadecimal indicator (Orange)
2. Address display (Red)
3. ENTER key
4. SELECT keys
5. Mode selection switch
6. Transmission indicator (Green)
7. Error indicator (Red)
8. S-LINK V terminal block connector
Description
B mode C mode
20