Safety Symbols - Agilent Technologies Cary 8454 Installation Manual

Some adjustments described in the manual, are made with power supplied
to the instrument, and protective covers removed. Energy available at
many points may, if contacted, result in personal injury.
Any adjustment, maintenance, and repair of the opened instrument under
voltage should be avoided as much as possible. When inevitable, this
should be carried out by a skilled person who is aware of the hazard
involved. Do not attempt internal service or adjustment unless another
person, capable of rendering first aid and resuscitation, is present. Do not
replace components with power cable connected.
Do not operate the instrument in the presence of flammable gases or
fumes. Operation of any electrical instrument in such an environment
constitutes a definite safety hazard.
Do not install substitute parts or make any unauthorized modification to
the instrument.
Capacitors inside the instrument may still be charged, even though the
instrument has been disconnected from its source of supply. Dangerous
voltages, capable of causing serious personal injury, are present in this
instrument. Use extreme caution when handling, testing and adjusting.

Safety Symbols

Table 8
Symbol
Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide
Safety Symbols used on Instruments and in Manuals
Description
The apparatus is marked with this symbol when the user should refer to the
!
instruction manual in order to protect the apparatus against damage.
Indicates dangerous voltages.
Indicates a protected ground terminal.
Eye damage may result from directly viewing light produced by deuterium lamps
used in detectors and spectrophotometers. Always turn off the deuterium lamp
before opening the lamp door on the instrument.
Safety Information A
Safety Information
137