Agilent Cary 8454 UV-Visible Spectroscopy System
Installation Guide
6
GPIB Communication, Connections and
Configuration
This chapter describes how to install the GPIB communication library and
configure the GPIB interface of your computer, and how to change the
GPIB address of your spectrophotometer.
Additional information about the installed I/O library, the use of the tools
and hints for troubleshooting are provided.
• Changing of the GPIB address might be required when you run more
than one module connected to your GPIB interface. The GPIB address
of the connected modules must be unique.
80
81
103
104
105
Agilent Technologies
84
88
94
79