Agilent Technologies Cary 8454 Installation Manual page 131

Using the Agilent ChemStation Configuration Editor to Configure the Spectrophotometer
4 If GPIB communication has been setup for the spectrophotometer, the
Figure 63
5 Select the Spectrophotometer 8454 in the Modules tab, select the LAN
6 Select Identify by IP Address and type in the IP address of the LAN
Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide
LAN Communication, Installation, Connection and Configuration
following screen will come up (25 is the default GPIB address).
Device configuration dialog (GPIB interfacing)
Select the Spectrophotometer 8454 - GPIB 25 entry in the Selected
Modules tab and click Delete to delete the selected module.
option, and click Add to add to the Selected Modules box.
interface card. (If a DNS server is installed you can also define the host
name.)
7
131