Agilent Technologies Cary 8454 Installation Manual page 126

7 LAN Communication, Installation, Connection and Configuration
Using the Agilent BootP Service
5 To edit the BootP Settings go to Start >All Programs > Agilent BootP
6 To edit the TabFile, select Maintain bootp tabfile?
7 Select Do you want to log bootp requests?
8 Perform your necessary changes by e.g. creating a log file entry of a
9 Deselect Do you want to log bootp requests?
10 Click OK to save the values or Cancel to discard them. The program
11 To restart the BootP Service go to Start > Settings > Control Panel >
12 Right click Agilent BootP Service.
13 Select Start.
14 Close the Services and Administrative Tools screen.
15 This completes the configuration.
126
Service > Edit BootP Settings. The BootP Settings screen appears.
When this screen opens the first time, the default settings from
installation are displayed.
The default tab file was created at installation and is located at
Program Files\Common Files\Agilent Shared\BootP\bin\TabFile. It
contains configuration information entered on this screen.
If necessary you can
• change the BootPtab File Location by using the browse button on the
right (a valid BootP tabfile must exist).
• create your own template for the tabfile by selecting Create template
BootP tabfile? and click Create Template.
The default log file was created at installation and is located at
Program Files\Common Files\Agilent Shared\BootP\bin\LogFile. It
contains an entry for every time a device requests configuration
information from BootP.
If necessary you can change the BootPlog File Location by using the
browse button on the right (a valid BootP tabfile must exist).
new instrument and edit the new instrument using the Launch Manager.
ends.
System and Security and select Administrative Tools > Services. The
Service screen appears.
Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide