Table of Contents
Advertisement
6
GPIB Communication, Connections and Configuration
Configuring the Agilent 82357 USB - GPIB Interface
Configuring the Agilent 82357 USB - GPIB Interface
• To configure your 82357 USB- GPIB Interface, the Agilent IO Libraries
• A USB 1.0 or 2.0 connection on your PC must be available.
Local administrator rights are required to configure your interface.
N O T E
1 Plug the 82357A/B USB- GPIB Interface into the GPIB connector of the
If a GPIB cable is used to interconnect multiple modules (e.g. 89090A Peltier Temperature
N O T E
controller) the USB Interface device must also be plugged into the GPIB connector
Figure
Figure 39
94
Suite must be installed. See
Communication Library"
instrument's GPIB connector.
39).
82357 USB-GPIB interface on a spectrophotometer
Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide
"Installation of the Agilent GPIB
on page 84 for details.
(see
Advertisement
Table of Contents
Troubleshooting
