Ce Compliance - Agilent Technologies Cary 8454 Installation Manual

A Safety Information
Warning and Caution Messages
The following symbols appear on the instrument for your information:

CE Compliance

Your Agilent instrument has been designed to comply with the
requirements of the Electromagnetic Compatibility (EMC) Directive and the
Low Voltage (electrical safety) Directive (commonly referred to as the LVD)
of the European Union. Agilent has confirmed that each product complies
with the relevant Directives by testing a prototype against the prescribed
EN (European Norm) standards.
Proof that a product complies with these directives is indicated by:
• the CE Marking appearing on the rear of the product, and
• the documentation package that accompanies the product containing a
140
copy of the Declaration of Conformity. The Declaration of Conformity is
the legal declaration by Agilent that the product complies with the
directives listed above, and shows the EN standards to which the
product was tested to demonstrate compliance.
Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide
Single phase alternating current.
When attached to the rear of the instrument, indicates that
the product complies with the requirements of one or more
EU directives.
When attached to the rear of the product, indicates that the
product has been certified (evaluated) to CSA 61010.1 and
UL 61010-1.