Setting The Ip Address Of The Spectrophotometer - Agilent Technologies Cary 8454 Installation Manual

LAN Communication, Installation, Connection and Configuration 7
Connecting the Spectrophotometer to the PC
Use standard twisted
pair LAN cables for the
connections.
Personal computer Network Switch
Instruments
Figure 58 LAN connection using a switch

Setting the IP Address of the Spectrophotometer

The IP address of the LAN interface card inserted to the
spectrophotometer can be assigned by using the Agilent bootp service.
This service assigns the LAN interface card with a configured IP address,
each time an IP address is requested. Refer to the next section "Using the
Agilent BootP Service" on page 120.
If the system is on an isolated LAN and the default IP address 192.168.254.11 for the
N O T E
spectrophotometer is used, BootP is not necessary.
Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide 119