Show Ethernet Service Evc - Cisco ME 3400 Command Reference Manual

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

show ethernet service evc

Use the show ethernet service evc privileged EXEC command to display information about Ethernet
virtual connection (EVC) customer-service instances.
This command is available only if your switch is running the metro IP access or metro access image.
Syntax Description
id evc-id
interface interface-id
detail
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.2(25)SEG
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is an example of output from the show ethernet service evc command:
Switch# show ethernet service evc
Identifier
BLUE
PINK
PURPLE
BROWN
GREEN
YELLOW
BANANAS
TEST2
ORANGE
TEAL
OL-9640-07
show ethernet service evc [id evc-id | interface interface-id] [detail] [ | {begin | exclude | include}
expression]
(Optional) Display EVC information for the specified service. The EVC
identifier can be a string of from 1 to 100 characters.
(Optional) Display EVC information for the specified interface.
(Optional) Display detailed information about EVC service or the specified
EVC ID or interface.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Type Act-UNI-cnt Status
P-P 2 Active
MP-MP 2 PartiallyActive
P-P 2 Active
MP-MP 2 Active
P-P 3 Active
MP-MP 2 PartiallyActive
P-P 0 InActive
P-P 0 NotDefined
P-P 2 Active
P-P 0 InActive
Cisco ME 3400 Ethernet Access Switch Command Reference
show ethernet service evc
2-389