Show Ssl-Proxy Service - Cisco Catalyst 6500 Series Command Reference Manual

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

show ssl-proxy service

To display information about the configured SSL virtual service, use the show ssl-proxy service
command.
Syntax Description name
context name
Defaults This command has no default settings.
Command Modes EXEC
Command History Release
Cisco IOS Release
12.1(13)E and SSL Services
Module Release 1.1(1)
SSL Services Module
Release 3.1(1)
Examples This example shows how to display all SSL virtual services that are configured on the SSL Services
Module:
ssl-proxy# show ssl-proxy service
No context name provided, assuming context 'Default'...
Proxy Service Name
s2
s3
ssl-proxy#
This example shows how to display a specific SSL virtual service that is configured on the SSL Services
Module:
ssl-proxy# show ssl-proxy service S6
No context name provided, assuming context 'Default'...
Service id: 1, bound_service_id: 257
Virtual IP: 10.10.1.104, port: 443
Server IP: 10.10.1.100, port: 80
Virtual SSL Policy: SSL1_PLC
Server TCP Policy: nagle
TCP Health Probe Policy: tcp-health
OL-9105-01
show ssl-proxy service [name][context name]
(Optional) Service name.
(Optional) Displays service information for the specifed context name.
Context Name
Default
Default
Modification
Support for this command was introduced on the Catalyst 6500 series
switches.
This command was changed to add the context name keyword.
Admin Operation
status status
up up
up up
Catalyst 6500 Series Switch SSL Services Module Command Reference
show ssl-proxy service
2-75