Function - Minolta Di200 Service Manual

FrameMaker Ver5.5E(PC) Di200/Di251/Di351 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.01.26
Touch Panel
Display
Device Shows the numbers of prints for different applications. It also allows
the Tech. Rep. to clear each counter.
Display
Copier
Printer
Report Print
FAX Print
FAX Transmission No. of prints made for fax transmission
Mail Transmission No. of prints made for mail transmission
Maintenance Set different count values for the Maintenance Counter.
When the count reaches the preset value, the icon "
the Sub-Message Display.
<Procedure>
1. Touch "Maintenance (Set)".
2. Press the Clear key to clear the current value.
Press the Interrupt key to undo the clearing operation, restoring
the original value.
3. Enter the value from the 10-Key Pad.
(5)

Function

• This function allows the Tech. Rep. to make the various function tests and adjustments.
Touch Panel
Display
F1
A check is made for paper passage performance.
<Procedure>
1. Select the paper source.
2. Press the Start key to start the paper passage cycle.
3. Press the Stop key to stop the paper passage cycle.
F2 This test is for factory adjustment only and should NOT be used.
F7-1
Automatically adjusts the threshold level of the Original Size Detect-
ing Sensor.
For details, see DIS/REASSEMBLY, ADJUSTMENT.
F8
This test is for factory adjustment only and should NOT be used.
F12
Outputs the test pattern.
<Procedure>
1. Select the paper source.
2. Press the Start key to start the output sequence.
3. Press the Stop key to stop the output sequence.
Setting
Description
No. of prints made by copier
No. of prints made by printer
No. of report prints made
No. of fax prints made
Setting
<Paper Passage>
<Original Size Detecting Sensor Adjustment>
<ATDC Sensor Automatic Adjustment>
<Test Pattern>
S-25
" appears in