FrameMaker Ver5.5E(PC) Di200/Di251/Di351 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.01.26
2. Printer
• Make the necessary adjustments of the printer (engine).
Touch Panel
Display
Edge Erase
Set the erase width on the leading, trailing, right, and left edge of the
image.
Loop Adjustment
Set the length of the loop to be formed in paper before the Synchro-
nizing Rollers
Image Density
Set the image density for the printer. The value set for this function
becomes the central value of "
-3.............................................
Lighter
ATDC Sensor
Current: Shows the current ATDC control voltage.
Gain
Set: Set the ATDC control voltage.
Note:
• Be sure to record this value when I/C has been changed.
123 .......................................
T/C Greater
VG Adjust
Vary the Vg voltage to set the desired image density.
-2.............................................
Lighter
Setting (The default is
Highlighted
0 to 5 mm (
4 mm
-5 to +5 mm (
0 mm
Priority Density
............................................+3
0
.......................................186
155
0
............................................+2
S-19
).
)
)
" of User's Choice.
Darker
T/C Smaller
Darker