Minolta Di200 Service Manual page 98

FrameMaker Ver5.5E(PC) Di200/Di251/Di351 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.01.26
5. IR-Erasure Width
• Make the adjustment of original erase width on the IR side.
Note:
• For details, see DIS/REASSEMBLY, ADJUSTMENT
Touch Panel
Display
IR-Erasure Width Set the forced erasure width along the four edges of the paper.
0 mm .......................................
Smaller
6. Book Center Erasure
• Adjust the center erase width in Book copying.
Note:
• For details, see DIS/REASSEMBLY, ADJUSTMENT
Touch Panel
Display
Book Center Adjust the center erase width.
Erasure
2 mm .......................................
Smaller
7. Orientation Change
•
This function allows the Tech. Rep. to align the orientation of the image
Touch Panel
Display
Orientation Select whether or not to align the orientation of the image between an
Change ordinary copy and a stapled or punched copy.
OFF
ON
Setting (The default is Highlighted
.......................................3 mm
0
Setting (The default is Highlighted
0 .....................................20 mm
Setting (The default is
Highlighted
The orientation of the image differs between an
ordinary copy and a stapled or punched copy.
The orientation of the image is the same for an ordi-
nary copy and a stapled or punched copy.
S-21
).
Greater
).
Greater
.
).