FrameMaker Ver.5.5E(PC) Di200/Di251/Di351 DIS/REASSEMBLY, ADJUSTMENT
01.02.09
4011D048AA
pulley D
pulley C
4011D049AC
pulley A
pulley B
4011D102AA
Cable Guide
4011D050AA
1167D051AC
4. Slide the pulley to the front and fit one retaining
ring E type.
5. Pushing the pulley tightly up against the retaining
ring E type, secure the pulley with one screw.
6. Wind the fixed bead end of the cable around pul-
ley D and pulley C and fit the fixed bead at a posi-
tion about 5.5 mm from the Scanner rail.
7. Wind the hook end of the cable around pulley A
and pulley B.
8. Install the cable guide, fit the hook end of the
cable into the groove in the cable guide, and
hook the spring.
Rear
9. Position the round bead of the cable (black) at
the position shown in the illustration.
D-21