FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
5
SERVICE MODE
• This mode is used by the Tech. Rep. to set, check, adjust, and/or program various ser-
vice functions.
5-1.
Service Mode Function Tree
Test
Service Mode No. 1
Service
Tech. Rep.
Mode
Choice
Service Mode No. 2
Altering Fixed Zoom Ratios
For 23 cpm Copier only
Service Mode No. 3
~
F1 : Paper passage test
F2 : PC Drum Charge/Image Transfer Coronas output
F3 : Exposure Lamp voltage adjustment
F4 : Paper Separator Corona output
F5 : AE Sensor automatic adjustment
F6 : Edge Erase Lamp check
F7 : Original Size Detecting Unit adjustment
F8 : ATDC Sensor automatic adjustment
F9 : IU check, optimum exposure adjustment
FA : Scanner/Image Erase Lamp operation check
C-0 : Plug-In Counter counting
C-1 : Size Counter counting
C-2 : Total Counter counting
C-4 : Maintenance Call Reminder ON/OFF
C-5 : PM Counter
C-6 : Plug-In Counter copying enable/disable
C-7 : IU 60K stop
C-15 : Toner empty stop
C-20 : Leading edge erase
C-21 : Trailing edge erase
C-23 : Loop length adjustment
C-31 : 1-sided original stop position adjustment
C-32 : 2-sided original stop position adjustment
C-33 : 2-in-1 original stop position adjustment
C-34 : 2-in-1 original distance adjustment
C-37 : S-ADF mode original stop position adjustment
C-38 : ADF Registration Loop adjustment
C-40 : Orig.
copy type
C-90 : ATDC detection level
For 23 cpm Copier only
For 18/23 cpm Copier only
S-16