Settings In The Security Mode - Minolta Di200 Service Manual

FrameMaker Ver5.5E(PC) Di200/Di251/Di351 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.01.26
5-3.

Settings in the Security Mode

Touch Panel
Display
Total Counter Select the condition by which the Counter count is increased.
Mode 1
Mode 2
Mode 3
Size Counter Select the size of the paper to be counted by the Size Counter.
Copy Kit Counter Select whether to enable or disable the "Copy Kit count."
Mode 1
Mode 2
Mode 3
Copy Kit Enter a value for the Copy Kit Counter.
When the current value reaches the set value, the following display is
given.
• Copy Kit Counter setting
Mode 2: The icon "
Mode 3: The maintenance call reminder "M4" appears and the
<Procedure>
1. Touch "Set."
2. Press the Clear key to clear the current setting.
If the setting is accidentally cleared, press the Interrupt key to
undo the clearing operation.
3. Enter the desired value from the 10-Key Pad.
4. Touch "Current."
5. Press the Clear key to clear the current value.
If the current value is accidentally cleared, press the Interrupt key
to undo the clearing operation.
Plug-In Counter Select the condition by which the Counter count is increased.
Setting (The default is
1 Copy per 1 copy cycle
Multiple count-up according to paper size 1/2-sided
copying
Multiple count-up according to paper size 1/2-sided
copying
No Count
A3/B4/11x17/Legal
A3/B4/11x17/11x14/Legal/FLS
Disables the Copy Kit counter.
Copying not inhibited after the count reaches the
present value.
Copying inhibited after the count reaches the
present value.
" appears in the sub-message display.
initiation of a new copy cycle is inhibited.
Copy Made
S-30
).
Highlighted
A3/11x17
Copy Cycles