FrameMaker Ver.5.5E(PC) Di200/Di251/Di351 DIS/REASSEMBLY, ADJUSTMENT
01.02.09
10. Remove all connectors of PWB-A.
11. Remove the harness from six cord clamps, six wiring saddles, and two edge covers.
12. Remove six screws and the PWB-A Assy.
4011D030AB
4011D031AA
4011D032AA
13. Remove one screw and the Flexible Harness
Guide.
14. Remove five screws and the Reinforcement
Bracket.
15. Unplug one connector from the Power Switch.
16. Remove the harness from one edge cover, four
wiring saddles, and two cord clamps.
D-15
4011D029AB