I/O Check; Movement Check - Minolta Di200 Service Manual

FrameMaker Ver5.5E(PC) Di200/Di251/Di351 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.01.26
(6)

I/O Check

• Checks the function of sensors.
Touch Panel
Display
Scan-through ADF For details, see Option service manual.
Scanner For details, see Option service manual.
ADFR For details, see Option service manual.
Mail Bin Finisher For details, see DIS/REASSEMBLY, ADJUSTMENT.
Printer For details, see DIS/REASSEMBLY, ADJUSTMENT.
Finisher For details, see Option service manual.
Sift Tray/Job Tray For details, see Option service manual.
(7)

Movement Check

• Runs a specified mechanism to check for operation.
Touch Panel
Display
ADF Paper Makes a paper passage check through the ADF.
Passage <Procedure>
1. Select the paper passage mode.
2. Place paper on the Document Feed Tray.
3. Press the Start key.
Scanner Checks the Scanner for operation.
• Drives the CCD (for factory adjustment only and should NEVER be
used).
• Turns ON the Exposure Lamp.
• Moves the Scanner, the distance of movement being specified from
the 10-Key Pad.
<Procedure>
1. Enter the distance of movement from the 10-Key Pad.
2. Touch "Set".
Exp. Lamp Check Checks the intensity of the Exposure Lamp light.
Setting
Setting
S-26