Rd Mode - Minolta Di200 Service Manual

FrameMaker Ver5.5E(PC) Di200/Di251/Di351 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.01.26
(8)

RD Mode

• Make the initial settings of the copier for the Data Terminal.
1. RD Mode Menu Function Tree
ID Code
RD Mode
Maintenance
RAM Clear
Common DT
2. Setting in the RD Mode
Touch Panel
Display
ID Code Enter the ID code.
<Procedure>
1. Touch the ID Code key.
2. Enter the ID code from the 10-Key Pad.
3. Touch the ID Code key. (This executes the transmission of
MAINT. START to the Center.)
Maintenance Displays the various setting screens.
DT Setting Displays the setting screens for CT-ID, DT-ID, and telephone number.
CT-ID Enter the ID number of the Center PC from the 10-Key Pad.
DT-ID Enter the ID number of the Data Terminal from the 10-Key Pad.
TEL No. Enter the telephone number of the modem connected to the Center
PC.
CT-ID
DT Setting DT-ID
TEL. #
Initial
Transmisson
Counter
Clear
Call
Completion
Dial Mode
Auto Receive
Result Code
Setting (The default is
Highlighted
S-27
).