Minolta Di200 Service Manual page 89

FrameMaker Ver5.5E(PC) Di200/Di251/Di351 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.01.26
Touch Panel
Display
Intelligent Sorting Select whether to enable or disable the function that automatically
switches between Sort and Non-Sort according to the number of orig-
inals and the number of copy sets to be made.
Applicable when the system is equipped with a finishing option and
using an ADF or ADFR.
Output Tray Select the output tray for each application when the system is
equipped with a finishing option.
<Fax>
<PC Print>
<Copy> Displayed when a Job Tray is mounted.
When a Finisher is mounted: PC Print default setting "2"
"Small" Originals Select whether to enable or disable a copy cycle when it is initiated
with an original of a small size that is not detectable by the system
placed on the Original Glass.
Default: Metric areas OFF / Inch Areas ON
Scanner Dry Set the time-of-day to run a Scanner drying cycle.
Note:
• When entering a value for Hours and Minutes and if it is a single-
digit number, first enter a "0."
Density (ADF only) Adjust the copy image density level when the ADF is being used.
: Initial setting
Setting (The default is
ON
2
1
2
1
1
ON
When the standard original (text, etc.) is
used.
To give better reproduction of faint original.
S-12
Highlighted ).
OFF
3
3
2
OFF