Minolta Di200 Service Manual page 45

FrameMaker Ver.5.5E(PC) Di200/Di251/Di351 DIS/REASSEMBLY, ADJUSTMENT
01.02.09
4011D072AB
4011D073AA
4011D074AB
4011D075AB
4011D076AB
18. Remove one shoulder screw and the Fusing
Guide Assy.
19. 1Remove one screw, one shoulder screw, and
the cover.
20. Snap off one retaining ring E type and remove
the Front Pressure Lever Assy and bearing.
21. Snap off one retaining ring E type and remove
the Rear Pressure Lever Assy and bearing.
22. Remove the Right Fusing Roller.
23. Remove three screws, frame, spring, and the
lever.
NOTES
• Study the illustration for how the spring is installed.
• After the spring has been installed, move the lever
in the direction of the arrow to make sure that it is
returned by the tension of the spring.
D-30