Winding Of The Scanner Drive Cables - Minolta Di200 Service Manual

FrameMaker Ver.5.5E(PC) Di200/Di251/Di351 DIS/REASSEMBLY, ADJUSTMENT
01.02.09
(9)

Winding of the Scanner Drive Cables

Pulley F
Pulley E
Pulley G
1167D051AC
Cable on Hook End
1167D052AD
Cable on
Bead End
1167D053AD
Pulley H
Pulley C
Pulley B
Pulley A
Front
1. Position the round bead of the cable (silver) at
the location shown in the illustration.
2. Wind the hook end of the Scanner Drive Cable
two turns counterclockwise from the rear side to
the front.
3. Wind the bead end of the cable four turns clock-
wise from the front to the rear. Then, secure the
cable with tape.
NOTE
• Make sure that no part of the cable rides on the
other.
D-20
Pulley D
4011D047AB