Minolta Di200 Service Manual page 97

FrameMaker Ver5.5E(PC) Di200/Di251/Di351 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.01.26
3. ADFR
• Make the necessary adjustments of ADFR.
Note:
• For details, see Option service manual.
Touch Panel
Display
Original Stop Adjust the document stop position in each of the ADF modes.
Position
-7.............................................
Smaller
Registration Loop Set the length of the loop to be formed in the original fed off the ADF
before the Registration Roller.
-5 mm......................................
Smaller
4. Scan-through ADF
• Make the necessary adjustments of AFR.
Note:
• For details, see Option service manual.
Touch Panel
Display
Registration Adjust registration in the main and sub-scanning directions of the
ADF.
Main Scanning (CD)
-72 dot.....................................
Smaller
Sub Scanning (FD)
-127 dot...................................
Smaller
Zoom Adjust Adjust the scanning zoom ratio in the main and sub-scanning direc-
tions of the ADF.
0.990 .......................................
Reduction direction
Setting (The default is Highlighted
0 ............................................+7
0 .....................................+5 mm
Setting (The default is
Highlighted
....................................+72 dot
0
..................................+127 dot
0
.......................................1.000
0
S-20
).
Greater
Greater
).
Greater
Greater
Enlargement direction