Removal Of The Scanner Drive Cables - Minolta Di200 Service Manual

FrameMaker Ver.5.5E(PC) Di200/Di251/Di351 DIS/REASSEMBLY, ADJUSTMENT
01.02.09
(8)

Removal of the Scanner Drive Cables

1. Remove the Original Glass.
2. Remove the Scanner.
3. Remove the Left Upper Cover and Left IR Cover.
Rear
Front
4011D042AA
4011D043AA
4011D044AD
4011D045AA
4011D046AA
4. Unhook the spring at the end of the cable from
the front hook and remove the cable guide.
Cable
5. Unhook the spring at the end of the cable from
Guide
the rear hook.
6. Remove one screw, unplug one connector, and
remove the Original Size Detecting Sensor.
Option for the inch areas
7. Remove the cover.
See step 2 of "(2) Removal of the CCD Unit" of "2-
5. OPTICAL SECTION."
8. Remove four screws and the Reinforcement
Bracket.
9. Snap off one retaining ring E type and remove
one mounting screw from the front pulley and
slide the pulley to the rear.
10. Snap off one retaining ring E type and remove
one mounting screw from the rear pulley and
slide the pulley to the front.
11. Remove the Scanner Drive Cable, hook end first.
D-19