Table of Contents
Advertisement
2.2.3 Operating Environment Specifications
Environmental
Conditions
Mechanical
Operating
Conditions
Electrical
Operating
Conditions
Installation
Requirements
2.3 Device Description File
The device description file is a profile that states the information of a device, and it is provided by the slave device
manufacturer. An EtherCAT network can be configured by installing this file in the configuration tool of the master
device. The device description file is written in the XML format. (It is a setting file equivalent to the EDS file used with
DeviceNet, Ethernet/IP.)
Obtain the device description file by either of the following methods.
• The MPE720 installation disk
• Downloading from the Yaskawa website (the e-mechatronics site: http://www.e-mechatronics.com/index.jsp)
Table 2.3 Operating Environment Specifications for the 264IF-01 Module
Item
Ambient Operating
0 to +55 °C
Temperature
Ambient Storage
−25 to +85°C
Temperature
Ambient Operating
30% to 95% RH (with no condensation)
Humidity
Ambient Storage Humidity
5% to 95% RH (with no condensation)
Pollution Level
Pollution level 2 (conforming to JIS B 3502)
Operating Altitude
2,000 m above sea level or lower
Vibration amplitude/acceleration
16.7 Hz
Vibration Resistance
10 ≤ f < 57 Hz
57 ≤ f ≤ 150 Hz
Peak acceleration of 147 m/s
Shock Resistance
tions
Noise Resistance
Conforming to EN 61000-6-2, EN 61000-6-4, EN 55011 (Group 1 Class A)
Ground to 100 Ω max.
Ground
Cooling Method
Natural cooling
2.3 Device Description File
2.2.3 Operating Environment Specifications
Specifications
2
14.7 m/s
0.075 mm of single-amplitude
2
9.8 m/s
of fixed acceleration
2
twice for 11 ms each in the X, Y, and Z direc-
2
2-7
Advertisement
Table of Contents
