Spindle Speed S, Feed Rate F And Miscellaneous Functions M; To Change The Feed Rate F - HEIDENHAIN TNC 370 User Manual

2 Manual Ooeration and Setuo
2.2 Spindle Speed S, Feed Rate F and Miscellaneous Functions M
To change the feed rate F
In the MANUAL OPERATION mode the feed rate is set in a
machine parameter.
,
100
Turn the feed rate override knob:
50
Adjust the feed rate to between 0 % and 150 % of the last active
value.
1
To enter the miscellaneous function M
Shift the soft key row.
Select the M soft key to enter the miscellaneous function.
Enter the desired miscellaneous function M, for example M6.
Activate the miscellaneous function M with the NC start key.
Chapter 12 provides an overview of the miscellaneous functions.
-
d
d
d
-
-
1
-
2-6 TNC 370