Installing A 3.5-Inch Hdd Module; Concluding Steps - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
7.3.2.3

Installing a 3.5-inch HDD module

Figure 90: Opening the 3.5-inch HDD module locking lever
Ê Pinch the green locking clip (1) and open the locking lever (2).
Figure 91: Installing the 3.5-inch HDD module
Ê Insert the HDD module into a drive bay and carefully push back as far as it
will go (1).
Ê Close the locking lever to lock the HDD in place (2).
Ê When using a RAID array, add the additional HDD/SSD to the RAID array.
7.3.2.4

Concluding steps

No steps needed.
170 Upgrade and Maintenance Manual
RX1330 M3