Replacing A Riser Card; Preliminary Steps; Removing The Riser Card - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Expansion cards and backup units
9.4.4

Replacing a riser card

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
9.4.4.1

Preliminary steps

"Locating the defective server" on page 50
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
"Locating the defective component" on page 51
Ê
Ê Remove the corresponding riser module as described in section
a riser module" on page
9.4.4.2

Removing the riser card

Ê Remove the expansion card as described in section
expansion card" on page
Figure 118: Removing the riser card - example riser module 1
Ê Remove the two screws (1).
Ê Remove the riser card (2).
204
66.
199.
Upgrade and Maintenance Manual
Hardware: 5 minutes
"Removing the
"Removing
RX1330 M3