6.4
Fujitsu battery unit (FJBU)
6.4.1
Installing the FJBU
Customer Replaceable Unit
(CRU)
Tools: tool-less
6.4.1.1
Preliminary steps
No steps needed.
6.4.1.2
Removing the dummy cover
Figure 39: Removing a dummy cover
Ê Press in on both release latches (1) and remove the dummy cover (2).
V
CAUTION!
Keep the dummy cover for future use. If a FJBU is removed and not
immediately replaced by a new one, a dummy cover must be reinstalled
in the bay to comply with applicable EMC regulations and satisfy cooling
requirements.
RX1330 M3
Upgrade and Maintenance Manual
Power supply unit (PSU)
Hardware: 5 minutes
121