Sliding The Server Into The Rack - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY RX1330 M3:

Table of Contents

Sliding the server into the rack

Figure 9: Sliding the server into the rack

Ê Release the locking mechanism of both rails (1).

Ê Push the server as far as it will go into the rack (2) until the quick-release

levers engage (3).

Be careful with your fingers. You can pinch them when the quick-

release levers change to the release position.

Ê Reconnect all cables except the power cord to the server rear.

Upgrade and Maintenance Manual

Basic hardware procedures