Installing The Expansion Card; Concluding Steps - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Expansion cards and backup units
V
CAUTION!
Keep the slot cover for future use. If the expansion card is removed and
not replaced with a new one, the slot cover must be reinstalled due to
cooling, to comply with applicable EMC regulations and to protect
against fire.
9.4.1.3

Installing the expansion card

Ê Please read the documentation supplied with the expansion card.
Ê If applicable, install a slot bracket to the expansion card as described in
section "Installing a slot bracket" on page
Figure 115: Installing an expansion card - example riser module 1
Ê Carefully press the expansion card into the riser card slot (A), until it clicks
into place (1). Make sure that the lug on the slot cover (B) clicks into place
in the corresponding hole (2).
9.4.1.4

Concluding steps

Ê Install the corresponding riser module as described in section
riser module" on page
"Reassembling" on page 60
Ê
"Connecting the power cord" on page 64
Ê
"Switching on the server" on page 66
Ê
"Updating expansion card firmware" on page 82
Ê
"Enabling Option ROM scan" on page 83
Ê
"Resuming BitLocker functionality" on page 95
Ê
198
68.
Upgrade and Maintenance Manual
188.
"Installing a
RX1330 M3