Performing A Raid Array Rebuild - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Basic software procedures
I
For further information on how to resume BitLocker drive
encryption, please refer to the Microsoft TechNet library at
http://technet.microsoft.com/library/cc731549.aspx.
Please refer to the Fujitsu web pages for more details.

5.2.15 Performing a RAID array rebuild

After replacing an HDD that has been combined into a RAID array, RAID rebuild
will be performed completely unattended as a background process.
Ê Ensure that the RAID array rebuild has started normally. Wait until the
progress bar has reached at least one percent.
Ê Inform the customer about the remaining rebuild time, based on the
displayed duration estimate.
Figure 20: Progress bar (RAID array rebuild)
V
CAUTION!
The system is now operational, however, data redundancy will not be
available until the RAID array rebuild is complete. Depending on the
HDD capacity the overall process can take up to several hours, in some
cases even days.
I
You may notice a slight performance impact during rebuild.
96 Upgrade and Maintenance Manual
RX1330 M3