Expansion cards and backup units
9.4.6
Upgrading to the full height riser module
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
Figure 125: Upgrade kit
1
Full height riser module
2
Extension bracket
3
Screw
9.4.6.1
Preliminary steps
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
Ê Remove the riser module 2 and the riser module 3 as described in section
"Handling riser modules" on page
210
66.
Upgrade and Maintenance Manual
Hardware: 10 minutes
RX1330 M3