Basic hardware procedures
4.5
Reassembling
V
CAUTION!
Before attaching the covers, make sure no unnecessary parts or tools
●
are left inside the server.
The top cover must be replaced as soon as possible for purposes of
●
cooling, to comply with EMC regulations (regulations regarding
electromagnetic compatibility) and to prevent fires.
For further safety information, please refer to chapter
●
information" on page
4.5.1
Installing the top cover
Figure 7: Attaching the top cover
Ê Place the top cover on the server (1).
Ê Push the top cover as far as it will go in the direction of the arrow (2) until it
clicks in.
60
35.
Upgrade and Maintenance Manual
"Important
RX1330 M3