Concluding Steps - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Figure 51: Installing fan module 5
Ê Press down the four rubber pins until they engage (see circles).
Ê Connect the fan cable to connector "FAN5" on the system board.
For the cable plan see section
For the connector see section
6.5.4

Concluding steps

"Reassembling" on page 60
Ê
"Connecting the power cord" on page 64
Ê
"Switching on the server" on page 66
Ê
"Resuming BitLocker functionality" on page 95
Ê
RX1330 M3
"Cabling plans" on page
"Onboard connectors" on page
Upgrade and Maintenance Manual
Power supply unit (PSU)
312.
324.
131